SUPREME TORQUE
Universal Transmission/Hydraulic Fluid

A multipurpose powershift transmission/hydraulic fluid intended for a wide range of power driven equipment.
Provides performance requirements in agricultural, construction, and other off-highway and industrial equipment.

Meets all major OEM specifications for a powershift transmission fluid which includes gears, pumps, differentials, final drives, bearing, wet brakes, transmissions and PTO clutch applications. Meets and exceeds JOHN DEERE specifications J20A and Hy-Gard

COMPOSITION:
Steward Enterprise's Supreme Torque is blended with the highest quality oils and the highest quality additive package. It is further fortified with the following additives and ingredients that assures equipment owners and operators reduced downtime and extended equipment life

SEAL SWELL ADDITIVE:
 Keeps seals soft and pliable, preventing them from hardening and cracking.

EXTREME PRESSURE ADDITIVES:
Should the oil film rupture during shock loads or over loads the extreme pressure additives take over preventing metal to metal contact.

ADHESIVE & COHESIVE ADDITIVES:
Retards splattering and dripping making oil cling tenaciously to gears, bearings, bushings, and other metal parts.

SPECIAL BLEND OF POLYMERS:
These add lubricity to the oil and transfers heat immediately to the casing for dissipation This cooler operating condition allows for longer life of the components as well as longer life of the oil itself.

OXIDATION INHIBITORS:
Resists and reduces oxidation, induced sludge formations and oil thickening.

ZINC DITHIOPHOSPHATE:
Prevents wear on internal metal parts and seals.

FOAM INHIBITORS:
Eliminate minute air bubbles which permit metal to metal contact thus reducing friction, heat and pressure build up.

POUR POINT DEPRESSANTS:
Assures maximum lubrication during extreme cold temperatures and prevents channeling of the lubricant.

DISPERSANT ADDITIVES:
Will hold contaminants in suspension thus assuring the operators that these contaminates will readily drain from the unit.

Further specifications...